Exploration of BioMat-X

Samples	Ultimate static strength test	Torsion test	Static proof test	Cyclic compression test
A10	Failed	-	-	-
A25	Passed	Failed	-	-
A30	Passed	Failed	-	-
A50	Passed	-	-	-
A70	Passed	-	-	-
A90	Passed	-	-	-
A100	Passed	-	-	-
B2	Passed	Passed	Passed	Failed
B3	Passed	Passed	Passed	Passed

Declarations

Acknowledgments

The authors would like to appreciate the help and support from the Smithers company for assisting us with performing some tests. The company had no role in study design, decision to publish, or preparation of the manuscript.

Author contributions

FT: Conceptualization, Methodology, Investigation, Resources, Writing—original draft, Writing—review & editing, Visualization, Supervision, Project administration, Funding acquisition. NKK: Methodology, Validation, Formal analysis, Investigation, Writing—original draft, Visualization. MSMY: Methodology, Validation, Formal analysis, Investigation, Writing—original draft, Visualization. LHIN: Methodology, Validation, Formal analysis, Investigation, Writing—original draft, Visualization. FHM: Methodology, Validation, Formal analysis, Investigation, Writing—original draft, Visualization. AA: Methodology, Formal analysis, Investigation, Writing—review & editing, Visualization, Supervision. All authors read and approved the submitted version.

Conflicts of interest

The authors declare that they have no conflicts of interest.

Ethical approval

Not applicable.

Consent to participate

Not applicable.

Consent to publication

Not applicable.

Availability of data and materials

The raw data supporting the conclusions of this manuscript will be made available by the authors, without undue reservation, to any qualified researcher.

Funding

This project was partially supported by the NSF-CAREER under the NSF Cooperative Agreement CMMI-2146480. The funder had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.

Copyright

Publisher’s note

Open Exploration maintains a neutral stance on jurisdictional claims in published institutional affiliations and maps. All opinions expressed in this article are the personal views of the author(s) and do not represent the stance of the editorial team or the publisher.

References

Tavangarian F. The Need to Fabricate Lower Limb Prosthetic Devices by Additive Manufacturing. Biomed J Sci Tech Res. 2019;15:11662–73. [DOI]

Al-Thani H, Sathian B, El-Menyar A. Assessment of healthcare costs of amputation and prosthesis for upper and lower extremities in a Qatari healthcare institution: a retrospective cohort study. BMJ Open. 2019;9:e024963. [DOI] [PubMed] [PMC]

Van der Stelt M, Grobusch Martin P, Koroma Abdul R, Papenburg M, Kebbie I, Slump Cornelis H, et al. Pioneering Low-Cost 3D-Printed Transtibial Prosthetics to Serve a Rural Population in Sierra Leone – an Observational Cohort Study. E Clinical Medicine. 2021;35:100874. [DOI]

De Vivo Nicoloso LG, Pelz J, Barrack H, Kuester F. Towards 3D printing of a monocoque transtibial prosthesis using a bio-inspired design workflow. Rapid Prototyp J. 2021;27:67–80. [DOI]

Panesar A, Abdi M, Hickman D, Ashcroft I. Strategies for functionally graded lattice structures derived using topology optimisation for Additive Manufacturing. Addit Manuf. 2018;19:81–94. [DOI]

Rodgers GW, Van Houten EEW, Bianco RJ, Besset R, Woodfield TBF. Optimizing porous lattice structures for orthopaedic implants. Annu Int Conf IEEE Eng Med Biol Soc. 2015:2450–3. [DOI] [PubMed]

Tahir MSAD, Kadhim FM. Design and Manufacturing of New Low (Weight and Cost) 3D Printed Pylon Prosthesis for Amputee. IOP Conf Ser Mat Sci Eng. 2021;1094:012144. [DOI]

Wang X, Xu S, Zhou S, Xu W, Leary M, Choong P, et al. Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: A review. Biomaterials. 2016;83:127–41. [DOI] [PubMed]

Kranz J, Herzog D, Emmelmann C. Design guidelines for laser additive manufacturing of lightweight structures in TiAl₆V₄. J Laser Appl. 2014;27:S14001. [DOI]

10.

Mirzaali MJ, Moosabeiki V, Rajaai SM, Zhou J, Zadpoor AA. Additive Manufacturing of Biomaterials—Design Principles and Their Implementation. Materials (Basel). 2022;15:5457. [DOI] [PubMed] [PMC]

11.

Pitkin M. Design features of implants for direct skeletal attachment of limb prostheses. J Biomed Mater Res A. 2013;101:3339–48. [DOI] [PubMed] [PMC]

12.

Beck ON, Taboga P, Grabowski AM. Characterizing the Mechanical Properties of Running-Specific Prostheses. PLoS One. 2016;11:e0168298. [DOI] [PubMed] [PMC]

13.

Tavangarian F, Proano C, Zolko C. Performance of Low-Cost 3D Printed Pylon in Lower Limb Prosthetic Device. In: The Minerals, Metals & Materials Series, editors. Proceedings of TMS 2019 148th Annual Meeting & Exhibition Supplemental. San Antonio, USA. Cham: Springer; 2019. pp. 1207–15. [DOI]

14.

Inseemeesak B, Siripaiboon C, Somkeattikul K, Attasophonwattana P, Kiatiwat T, Punsuvon V, et al. Biocomposite Fabrication from Pilot-Scale Steam-Exploded Coconut Fiber and PLA/PBS with Mechanical and Thermal Characterizations. J Clean Prod. 2022;379:134517. [DOI]

15.

Torabi AR, Shahbaz S, Ayatollahi MR. Tensile fracture prediction of 3D-printed V-notched PLA specimens: Application of VIMC-MEMC in conjunction with brittle fracture criteria. Eng Fract Mech. 2024;310:110497. [DOI]

16.

Terzopoulou Z, Zamboulis A, Bikiaris ND, Xanthopoulou E, Ioannidis RO, Bikiaris DN. A decade of innovation: Synthesis, properties and applications of PLA copolymers. Progress Polym Sci. 2025;167:101991. [DOI]

17.

Das M, Singh J, Santra S, Lalsangi S, Banerjee R. Breaking boundaries: Feasibility and flexibility of 3D printed polylactic acid composites in modern healthcare. Int J Biol Macromol. 2025;320:145804. [DOI]

18.

Zhai M, Ahmed Mohamed ET, Locquet A, Schneider G, Kalmar R, Fendler M, et al. Diagnosis of Injection-Molded Weld Lines in ABS Thermoplastic by Polarized Terahertz Reflective Imaging. NDT E Int. 2021;122:102497. [DOI]

19.

Peterson AM. Review of acrylonitrile butadiene styrene in fused filament fabrication: A plastics engineering-focused perspective. Addit Manuf. 2019;27:363–71. [DOI]

20.

Tyler B, Gullotti D, Mangraviti A, Utsuki T, Brem H. Polylactic acid (PLA) controlled delivery carriers for biomedical applications. Adv Drug Deliv Rev. 2016;107:163–75. [DOI] [PubMed]

21.

Naiyf AT, Kadhim FM, Hasan SF, Al-Din Tahir MS. Optimal design and manufacturing of 3D printable prosthesis pylon. Pollack Period. 2022;17:24–9. [DOI]

22.

Gonabadi H, Yadav A, Bull SJ. The Effect of Processing Parameters on the Mechanical Characteristics of PLA Produced by a 3D FFF Printer. Int J Adv Manuf Technol. 2020;111:695–709. [DOI]

23.

Tao Y, Kong F, Li Z, Zhang J, Zhao X, Yin Q, et al. A review on voids of 3D printed parts by fused filament fabrication. J Mater Res Tech. 2021;15:4860–79. [DOI]

24.

Cuan-Urquizo E, Barocio E, Tejada-Ortigoza V, Pipes RB, Rodriguez CA, Roman-Flores A. Characterization of the Mechanical Properties of FFF Structures and Materials: A Review on the Experimental, Computational and Theoretical Approaches. Materials (Basel). 2019;12:895. [DOI] [PubMed] [PMC]

25.

Ziegler-Graham K, MacKenzie EJ, Ephraim PL, Travison TG, Brookmeyer R. Estimating the prevalence of limb loss in the United States: 2005 to 2050. Arch Phys Med Rehabil. 2008;89:422–9. [DOI] [PubMed]

26.

Tavangarian F, Sadeghzade S, Davami K. A novel biomimetic design inspired by nested cylindrical structures of spicules. J Alloys Compd. 2021;864:158197. [DOI]

27.

Sadeghzade S, Emadi R, Salehi M, Tavangarian F, Ramini A. Crack propagation and toughening mechanisms of bio-inspired artificial spicules fabricated by additive manufacturing technique. Theor Appl Fract Mech. 2020;110:102797. [DOI]

28.

ISO 10328:2016 - Prosthetics — Structural Testing of Lower-Limb - Prostheses — Requirements and Test Methods [Internet]. ISO; [cited 2022 Dec 7]. Available from: https://www.iso.org/standard/70205.html

29.

Ortigao JAR, Sayao ASFJ. Handbook of Slope Stabilisation. Heidelberg: Springer Berlin; 2004. [DOI]

30.

Mohd Khairul Nizam MAN, Ismail KI, Yap TC. The Effect of Printing Orientation on the Mechanical Properties of FDM 3D Printed Parts. In: Enabling Industry 4.0 through Advances in Manufacturing and Materials. Singapore: Springer; 2022. pp. 75–85. [DOI]

31.

Jubinville D, Tzoganakis C, Mekonnen TH. Recycled PLA – Wood flour based biocomposites: Effect of wood flour surface modification, PLA recycling, and maleation. Constr Build Mater. 2022;352:129026. [DOI]

32.

MR S, Nallamuthu I, Singsit D, Anand T. Toxicological evaluation of PLA/PVA-naringenin nanoparticles: In vitro and in vivo studies. OpenNano. 2022;7:100061. [DOI]

33.

Bala A, Arfelis S, Oliver-Ortega H, Méndez JA. Life cycle assessment of PE and PP multi film compared with PLA and PLA reinforced with nanoclays film. J Clean Prod. 2022;380:134891. [DOI]

34.

Barber JR. Intermediate Mechanics of Materials. 2nd ed. Dordrecht: Springer; 2010. [DOI]

35.

Roche C, Sybilski D, Canestrari F, Piber H, Benedetto H, Bahia HU, et al. Advances in Interlaboratory Testing and Evaluation of Bituminous Materials. In: Partl MN, Bahia HU, Canestrari F, Roche C, Benedetto H, Piber H, et al., editors. Dordrecht: Springer; 2012. [DOI]

36.

Shan Z, Leng Y. Fracture and fatigue behavior of sintered steel at elevated temperatures: Part I. Fracture toughness. Metall Mat Trans A. 1999;30:2885–93. [DOI]

37.

Álvarez K, Lagos RF, Aizpun M. Investigating the influence of infill percentage on the mechanical properties of fused deposition modelled ABS parts. Ing Invest. 2016;36:110. [DOI]

38.

Birosz MT, Ledenyák D, Andó M. Effect of FDM infill patterns on mechanical properties. Polym Test. 2022;113:107654. [DOI]

39.

Johnson AD, Sherwin K. Foundations of Mechanical Engineering. CRC Press; 2017. [DOI]

40.

El Magri A, Vanaei S, Vaudreuil S. An Overview on the Influence of Process Parameters through the Characteristic of 3D-Printed PEEK and PEI Parts. High Perform Polym. 2021;33:862–80. [DOI]

41.

Baich L, Manogharan G, Marie H. Study of infill print design on production cost-time of 3D printed ABS parts. Inter J Rapid Manuf. 2015;5:308. [DOI]

42.

How Much Does a Prosthetic Leg Cost? [Internet]. Proudly affiliated with the T2 Web Network, LLC; c2022 [cited 2025 Aug 1]. Available from: https://www.howmuchisit.org/prosthetic-leg-cost

43.

How Much Does a Prosthetic Leg Cost in 2025? [Internet]. PrimeCare LLC; c2025 [cited 2025 Aug 1]. Available from: https://primecareprosthetics.com/blog/how-much-does-a-prosthetic-leg-cost-in-albuquerque

44.

Hussain M, Maqsood Khan S, Shafiq M, Abbas N. A review on PLA-based biodegradable materials for biomedical applications. Giant. 2024;18:100261. [DOI]

45.

Khouri NG, Bahú JO, Blanco-Llamer C, Severino P, Concha VOC, Souto EB. Polylactic acid (PLA): Properties, synthesis, and biomedical applications – A review of the literature. J Mol Struct. 2024;1309:138243. [DOI]