Valvular heart disease (VHD) is one of the major cardiovascular disorders contributing significantly to global morbidity and mortality. More than 100 million people are affected by VHD [1, 2]. The disease occurs due to abnormalities in the aortic, mitral, tricuspid, or pulmonary valves, leading to stenosis or regurgitation that restricts normal blood flow and impairs cardiac functions [3]. Degenerative valve calcification associated with aging is a major cause of VHD in developed countries [4, 5], whereas rheumatic heart disease caused by streptococcal infection remains prevalent in developing nations [6–8]. Untreated VHD may result in arrhythmias, thromboembolic events, heart failure, and sudden cardiac death [9, 10]. Therefore, early and accurate diagnosis is essential for effective clinical management. Echocardiography, cardiac magnetic resonance imaging, and computed tomography are considered gold-standard techniques for VHD diagnosis [11, 12]. However, these imaging modalities are expensive, require specialised infrastructure, and depend on expert clinicians, limiting their availability in rural and resource-constrained health care settings. Electronic stethoscopes enable non-invasive acquisition of phonocardiograph (PCG) signals and provide an alternative approach for cardiac assessment [13, 14]. Nevertheless, conventional auscultation remains highly dependent on physician expertise and subjective interpretation. Consequently, automated computer-aided analysis of PCG signals has gained increasing attention for intelligent cardiac screening and early disease detection [15]. Despite much progress, most conventional approaches still rely on segmented features and shallow classifiers that often prove insufficient in complex cardiac acoustic environments. DL methods have therefore been explored to automatically extract hierarchical representations from PCG signals [16–19]. Traditional heart sound classification methods mainly rely on hand-crafted feature extraction techniques such as mel-frequency cepstral coefficients (MFCCs), wavelet features, and time-frequency descriptors combined with machine learning (ML) classifiers [20–22]. Although these methods have shown promising results, hand-crafted features require extensive domain knowledge, manual intervention, and careful feature selection. Furthermore, hand-crafted representations may fail to preserve subtle murmur characteristics and complex temporal variations in PCG signals. Recent advances in DL, particularly convolutional neural networks (CNNs), have enabled automatic learning of discriminative features directly from raw biomedical signals without explicit feature engineering [23–26].

The current study uses heart sounds from electronic stethoscopes to automatically classify VHD using a deep CNN. This work analyses 10,366 heart sounds across ten classes, one normal and nine VHD types of varying severity, offering greater data diversity, complexity, and clinical applicability than previous research, thus enhancing the robustness and generalizability of VHD classification models. Figure 1 shows examples of PCG signals from 10 classes: severe aortic stenosis (AS), mild AS, mild mitral stenosis (MS), moderate MS, severe mitral regurgitation (MR), mild MR, moderate MR, severe tricuspid regurgitation (TR), moderate TR, and healthy.

The majority of research in the literature sought to identify whether VHD was present or not. In [16], the author used a DNN-based auto-encoder to classify heart conditions. The proposed method attained an accuracy of 100.0% on a dataset consisting of 449 heart sound recordings spanning five classes and 99.80% on another dataset consisting of 409 recordings classified into two classes. In [17], the author demonstrated a technique for classifying cardiac sounds using convolutional recurrent neural networks (CRNNs) and the mean frequency cepstral coefficients. When it came to classifying cardiac sounds into normal and pathological categories, they achieved 98.34% accuracy. In [18], the author proposed a CNN architecture for the classification of cardiac sounds. This proposed approach achieved 85.65% classification accuracy for normal versus pathological classes. In [19], the author developed a CNN-based heart sound classification model. They achieved an accuracy of 89.22% in the normal versus abnormal groups. In [20], the author developed a DL technique that used data augmentation to classify heart and lung sounds with a 97.00% accuracy rate. In [21], the authors extracted frequency and statistical information from cardiac sounds and used XGBoost to achieve 92.85% classification accuracy. In [22], the authors created an algorithm for classifying PCG signals using an artificial neural network and the MFCCs. For the classification of abnormal cardiac sounds, they applied the method in the time, frequency, and combined time-frequency domains and obtained accuracy rates of 90.00%, 83.33%, and 93.33%, respectively. In [23], the authors developed a DL technique called Deep Wave Net that achieved 97.00% accuracy in classifying heart sounds. In [24], the authors used backpropagation neural networks and one-dimensional CNNs to classify heart sounds, achieving a 99.01% accuracy rate. The classifier was based on a 1D binary pattern and neighbor component analysis (NCA). In [25], the authors employed recurrent and CNN to classify cardiac sounds into classes corresponding to MR, AS, MS, and mitral valve prolapse, with a 99.32% accuracy rate. In [26], the authors employed DSTP and DWT for feature extraction and INCA for feature selection, followed by an SVM for classification, and achieved an accuracy of 99.58%.

An automated cardiac analysis method is utilized to segment cardiac signals into subsequent cardiac cycles, which are then divided into two subcomponents (S1 and S2). In most circumstances, cardiac cycles are highly incorrect and difficult to employ in the diagnosis of cardiac illness [27, 28]. To address this issue, categorization mainly relies on features rather than divided cardiac subcomponents. As a result, crucial feature selection is critical to classification success, as each disease has its unique set of hand-developed features.

Additionally, some traits and characteristics of several diseases are identical, which may impact how well a diagnosis is made. Thus, high sample rates and complex characteristics are necessary. These complicated features are combined to generate a feature vector. Then, a classifier processes feature vectors of PCG signals to compute and make a diagnosis [29]. The classification approach can either be supervised or unsupervised.

Furthermore, particularly in the medical industry, DL plays a very essential role in the automated analysis of numerous disorders. In existing literature, handcrafted features such as MFCC, Centroid, Energy Entropy, and so on are used. Furthermore, these derived features are extremely limited and cannot capture the complexity of the original signal. Handcrafted features are frequently not robust, requiring subject knowledge and manual intervention. The feature engineering is removed in the suggested CNN model, making it automatic [30, 31]. As a result, there is a need for deep features that may be used for improved classification between types of diseases.

In the majority of the literature currently in publication, ML is used [32–35] to detect whether cardiac sounds are normal or abnormal. The proposed study classifies abnormal heart sounds into several cardiac diseases, including severe AS, mild AS, mild MS, moderate MS, severe MR, mild MR, moderate MR, severe TR, and moderate TR. The goal of this work is to use a 5-layer CNN to address the problem of cardiac signal misclassification between major heart disorders and to develop an artificial intelligence-based model to detect the severity of VHDs using DL. Heart sound classification has traditionally utilized segmentation, which identifies S1, S2, murmurs, and feature engineering, which includes extracting time-domain, frequency-domain, or time-frequency characteristics. However, by immediately learning patterns from raw signals, recent DL techniques [24–26] have lessened the necessity of these human procedures. The CNN models used in this work performed effectively in categorizing heart sounds without requiring feature engineering and heart sound signal segmentation.

The contribution of this article is summarized as follows.

1.

The primary contribution of this work presented here is a fully automatic multi-type VHD diagnosis system using a proposed 5-layer CNN architecture and PCG data.

The rest of this article is organized as follows. Section II explores the materials and methods. Section III shows the experimental results. Section IV discusses the experimental results.

DL was utilized to create a CNN architecture for multi-classification of heart diseases, which included training and testing sets. The outcome of the PCG dataset reveals that the suggested strategy is effective. Figure 4 illustrates the accuracy and loss of the CNN model in the available dataset. The green line depicts training accuracy and loss, whereas the yellow line represents validation accuracy as well as loss. The classification performance was evaluated using the generated confusion matrix, which is depicted in Figure 5. Several performance indicators were retrieved from the confusion matrix, including accuracy, sensitivity, precision, and F1 score. Each metric has been outlined in the equations (Equations 2–5) given below [42].

(2) A c c u r a c y = T P + T N T P + T N + F P + F N                                                                                          

(3) P r e c i s i o n = T P T P + F P                                                                                                                  

(4) R e c a l l = T P T P + F N                                                                                                                            

(5) f 1 s c o r e = 2 × ( P r e c i s i o n × R e c a l l ) P r e c i s i o n + R e c a l l                                                                                  

In multiclass classification, the evaluation metrics true positive (TP), true negative (TN), false positive (FP), and false negative (FN) are defined using a one-versus-all strategy for each class. For a given class i, TP represents the number of samples correctly classified as i. TN represents the number of samples that neither belong to class i nor are predicted as class i. FP corresponds to the number of samples from other classes that are incorrectly predicted as class i. FN denotes the number of samples belongs to class i but are misclassified as other classes. These values are computed independently for each class and then used to calculate performance metrics like accuracy, precision, recall, and F1-score in multi-class classification problems.

Figure 6 shows the receiver operating characteristic (ROC) curve and AUC of the CNN model for various cardiac diseases. Cardiac classes are colour-coded and represented by solid lines in the following order: severe AS, mild AS, mild MS, moderate MS, severe MR, mild MR, moderate MR, severe TR, moderate TR, and normal. This curve represents a plot of the FP rate on the x-axis and the TP rate on the y-axis. The dashed line indicates a non-discriminatory test. The AUC of the ROC curve is a scalar value that summarizes the model’s performance. It varies from 0 to 1.

AUC = 1.0 signifies a perfect model.

AUC = 0.5, this shows that the model is no better than random guessing.

AUC < 0.5, this means that the model performs worse than random guessing.

Table 4 displays the performance of the CNN architecture for multi-class VHDs for performance metrics of precision, recall, and F1-score. F1 score measures a DL model’s accuracy by calculating the harmonic mean of precision and recall, with 1 being the perfect value, as it provides zero FPs or zero FNs, i.e., perfect precision and perfect recall. Table 5 compares accuracy with earlier models for multi-classification of heart diseases. The proposed approach achieves great accuracy using the CNN model without feature engineering.

The present study shows the efficacy of a five-layer 1D CNN for multi-class classification and severity assessment of VHDs utilizing raw PCG signals. The suggested model achieved an overall accuracy of 99.81%, with precision, recall, and F1-score above 99.8% across ten clinically significant classes, including normal heart sounds and nine subtypes of VHD with different severity. By directly processing denoised PCG signals without segmentation or handcrafted feature extraction, the model eliminates several error-prone pre-processing steps commonly found in traditional approaches.

The proposed model achieves competitive performance with most previously reported method for heart sound classification. While earlier studies primarily focused on binary classification or a limited number of disease classes, the current work successfully addresses a more clinically relevant ten-class problem involving both type and severity of VHD. Notably, compared to Barua et al. [26], who reported 99.58% accuracy using extensive feature engineering (DSTP + DWT + INCA) followed by an SVM classifier on the same dataset. Our CNN-based method achieved higher classification accuracy while substantially reducing computational complexity. The proposed method demonstrates competitive performance compared with the previous approach. The real-time PCG signals exhibited in Figure 8 were acquired by a designed device from several heart patients in the presence of an expert heart specialist and fed to the CNN model to generate detection outcomes to be matched with the doctor’s diagnosis, as shown in Table 6.

The disadvantage of this study is that validation was performed on recordings from a single clinical centre. Future studies will integrate multi-centre datasets gathered with various electronic stethoscopes and recording conditions to improve generalizability.

The key findings of this work are stated below.

1.

A DL model that is five layers 1D CNN was proposed to classify 10 classes comprising nine VHD classes and one healthy class.